Project "G"

now you have twice as much to do compaired to yesterday.!!!!!

Yes dix your right, have to cut the drive shaft down, mock up the new raditor , put in the Lokar shifter, plus all the new engine parts I have. The goal is to have it driveable at least by summer.

Got my new driveshaft Saturday


I have a ton of parts to put on, I plan on starting getting this done next week

The FUN stuff !!

Yup Joe,that is the fun part.All new bright and shiny parts goin on.Looks like a parts store there G-man.

Looking GOOD Chris!!!!!!!!!!! What's the word on your body man???

Mike I have to talk to him in June and see whats going to happen or not happen

Looking great as usual, nice to see you back on track. Oh Ya

Finally finished the brakes tonight, Had a buddy make me a adjustable plunger rod and that solve the low pedal problem.

Have to change the radiator location a little with the new mount the lower radiator hose was a little too close to the air bag. I think if I move it over 3/4 inch that should do it

Chris ,I'm not seeing how the plunger can solve "low pedal" unless it's not releasing the MC enough to reset or your just taking up slack in the mechanical linkage?, Low pedal seems to be almost always just air in the system. What calipers did you end up using?

I used the K5 one I think, the stock plunger was long enough. (it was damaged) I have the full pedal now

i rember back in the day when i was somebody and worked for a liveing on the ford vans in the 90,s we hade to make sure there was a dime thickness of space from master cyl to booster the rods were adj able with out it no matter what you did you would have a low bk pedal.that or do like the young kid that worked for me did a bk job put the weels on and could not get any bk pedal at all. went to floor. i said pull the tires back off sure as shit stinks he left both calpers off blew the pucks rt out of them l.o.l i have seen some crazy shit in the fleet world.

Hey Chris is that a frenched antenna i see in the front driverside of your van, if so do u have any close ups of it?

Chris....I would be very interested in one of those modified rods to solve my "Low Peddle" issue! Would you please ask your friend if he would be interested in duplicating one more for what ever he charges! I would gladly pay for one!

I like that!!

Rollie I will ask him next time I see him

Thanks Chris! I really need to get my LP issue addressed! Thanks!!

If he does get to do one for me, I'll retrieve it and the radiator shroud at the Natz!

Well in May and June my business has been busy and with the Baker's show I have been very busy. Well nothing has been getting done on the 64.

Sad part is I have some simple parts to put on, but just haven't made time to do it. Well tonight I made some time and put on the new valve covers , carb and scoop (I have had this 2 years)

Got to finish that too , along with the drive shaft. Got to get busy on this van or it will never get done

n i c e ......................................

I don't know... I think it's to shiny !! LOL Lookin' good !

if that was my project i think i would 86 the front bumper and find some nerf bars or fabricate a split bumper but some purists