+3
DanTheVanMan
G-Man
67a 100 pickup
7 posters
69' wsds parts van
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°1
69' wsds parts van
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°2
Re: 69' wsds parts van
G-Man- Mayor
- Number of posts : 30743
Location : Fowlerville, MI
Age : 62
Registration date : 2008-05-06
- Post n°3
Re: 69' wsds parts van
Many good parts still?????
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°4
Re: 69' wsds parts van
22,000 orig miles... only thing bad so far has been one tail light can, headlight rings are only good if you don't have any. The long stainless moldings on the left have been cut down due to the generator. I'm thinking about taping them on my pickup to see what they look like before I put them up for sale. Roof windows are good, but the roof has been cut and sags from the weight of the a/c, so it is going to meet the sawsall in the a.m. Should have the body cut down to the floor tomorrow since the only good sheet metal is the front doors and nose. Once I get it down that far it will be time to see if the old girl fires or not. Hub caps are good, the 4th one is inside and has a small dent and are for sale. (15")
my door tag lists the rear end as a 39??? I guess that means 3:91???? 318, auto trans will be available soon if someone needs one.
my door tag lists the rear end as a 39??? I guess that means 3:91???? 318, auto trans will be available soon if someone needs one.
G-Man- Mayor
- Number of posts : 30743
Location : Fowlerville, MI
Age : 62
Registration date : 2008-05-06
- Post n°5
Re: 69' wsds parts van
Be sure to take all those small parts also, pop outs , switches , gauge panel etc... Use those parts for trades if you don't need them
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°6
Re: 69' wsds parts van
You know it... I even found that some of the pop outs are factory tinted, along with the flat windows in the rear. Matt has been going crazy with the screw drivers and 1/2" wrench taking all the little parts off while I have been getting the a/c and rack cut off. steering wheel only has one small crack so it is ear marked for the pickup and the dash pad goes to the 68' pop top.
G-Man- Mayor
- Number of posts : 30743
Location : Fowlerville, MI
Age : 62
Registration date : 2008-05-06
- Post n°7
Re: 69' wsds parts van
Bring some of those parts to Baker's with a table and try to sell them
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°8
Re: 69' wsds parts van
yeah, that would beat the hassle of ebay and shipping, but if someone on here needs something it's theirs.
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°9
Re: 69' wsds parts van
Hopefully I'll at least have the pickup in primer by then. It's been a slow go with all the weekend work due to end of fiscal year money and obama construction funds, not much time for sand blasting.
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°10
Re: 69' wsds parts van
The funniest part of this find is that the van was only 2 1/2 miles from my house. The guy that had it bought a trailer from a friend and he had seen mine before and asked him if I wanted another one.
G-Man- Mayor
- Number of posts : 30743
Location : Fowlerville, MI
Age : 62
Registration date : 2008-05-06
- Post n°11
Re: 69' wsds parts van
We always think there are none around us and then we find one very close. These vans are not as common as most other cars and truck, not as rare as you might think
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°12
Re: 69' wsds parts van
They are usually full of "stuff" and used as a storage shed most of the time too. This one had a hide-a-bed in the back to fortunately I got to leave behind when we picked the van up.
DanTheVanMan- Commissioner
- Number of posts : 7900
Location : Escanaba, Michigan
Age : 62
Registration date : 2008-10-08
- Post n°13
Re: 69' wsds parts van
I See lots of cool "Goodies" in and on that van!!!
_________________
DanTheVanMan
1965 Chevy G10 Sportvan Custom
1984 Jeep CJ-7 Laredo, Restored
2004 Kawasaki KLR650
1997 Jeep TJ Sport
My Mini Gallery
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°14
Re: 69' wsds parts van
There are a few parts that are swapping spots with the ones I have collected for the pickup. And a lot of parts that are going to go up for sale to cover the cost of the van. Everything is cut down to floor level now except the nose that I think is going over to the pickup also. Tomorrow night I'm going to see if I can get it to fire and move before I take the rest of it apart. After looking at the stainless trim taped on the pickup I decided it's a no go, so it's for sale.
jkr- Number of posts : 1148
Location : prince edward island canada
Age : 66
Registration date : 2008-05-29
- Post n°15
Re: 69' wsds parts van
some interesting pieces for sure. the "blue" steering wheel, seats, and door panels, are someones dream to have. then theres that onan gen set, holy crap you could light up a small town with one of those, about 6 kilowatts. i like the horn ring.
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°16
Re: 69' wsds parts van
There is some black showing through the steering wheel, so I don't know if it's painted or not. Both of the seats have one split in the center that has blue duct tape on it. The generator was used to power the radio station tower when they were at an event away from the station. He wanted $400 with the generator, but I got it for $300 and bring the gen back to him for his garage. I think I am going to swap the column, steering wheel, and steering gear as one unit so I don't run the risk of damaging anything.
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°17
Re: 69' wsds parts van
This van has a lot of stuff that both of the '67s and the '68 don't. I has blue plastic panels that go around all the pop outs and a extra piece of metal to dress up the edge of the r/s rear cargo door. It also has a day night mirror in the center of the windshield. I have to try the wipers, but the switch has a delay mark written on it (pic tomorrow) The front seats don't have the gap at the back either and they bolt in instead of having the 4 pins.
Dantra- Number of posts : 293
Location : Central Indiana
Age : 55
Registration date : 2009-08-31
- Post n°18
Re: 69' wsds parts van
Be sweet to have that tranny...seats...
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°19
Re: 69' wsds parts van
I have 2 other sets of seats that need to be redone that have the pin mounts, both sets are from '67. I also have another trans that can out of a '67 camp wagon, no idea if it works. This one I want to try and see if it shifts before I pull it out. I have a bunch of the little stuff to.
Dantra- Number of posts : 293
Location : Central Indiana
Age : 55
Registration date : 2009-08-31
- Post n°20
Re: 69' wsds parts van
pm sent with email...
shoot me some prices
shoot me some prices
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°21
Re: 69' wsds parts van
email on the way, pics to follow tomorrow after work.
benwah- Number of posts : 1135
Location : the land of broken dreams and shattered hopes CT
Registration date : 2008-07-05
- Post n°22
Re: 69' wsds parts van
Those blue plastic pannels and metal strip for the barn doors bring good $$ . They look cool in a pannel van too!
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°23
Re: 69' wsds parts van
I wish I could bring myself to sell the blue panels, but they fit the '68 pop top which is a sportsman so they are going in there with the idea of selling it in the spring.
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°24
Re: 69' wsds parts van
Mark, the first window I took out the tint was so perfect on I thought it was factory, but no such luck... After a couple of more I found some loose edges and it is film tint.
67a 100 pickup- Number of posts : 1319
Location : ann arbor, mi
Registration date : 2009-01-29
- Post n°25
Re: 69' wsds parts van
Got the fuel tank out tonight and all you can say is it is an a100 fuel tank. It has about 100 pin holes in it after sand blasting the crap off of it, and 1 repair in the bottom that would need to be redone. It's no prize, but if you don't have one I guess it is better than nothing. Almost all of the problem areas are under that paper mat that they put on top of the tank and down the front to keep it from rubbing.
» Parts,parts,& more parts=dodge, econo & chev stuff
» Sheet metal parts This buisness sells many different metal replacement parts for older cars trucks!! I know i have seen some van parts for our vans here from him!1 If it isnt listed - email or call them!!
» newbie, parts and parts pics and part locations
» Brake light switch
» some will cry -some will laugh- just costs $$ to fix!! & parts is =Parts!
» Sheet metal parts This buisness sells many different metal replacement parts for older cars trucks!! I know i have seen some van parts for our vans here from him!1 If it isnt listed - email or call them!!
» newbie, parts and parts pics and part locations
» Brake light switch
» some will cry -some will laugh- just costs $$ to fix!! & parts is =Parts!