by docmcg Sun Jun 02, 2019 9:19 pmI have my truck totally dismantled, and am in the process of installing independent suspension up front. Could someone please measure from the column support to the bottom of the bell on the steering column for me. I’m considering a tilt column and need this measurement. Thanks for the help.
3 posters
Need measurement
docmcg- Number of posts : 206
Location : Visalia, CA
Registration date : 2014-09-08
docmcg- Number of posts : 206
Location : Visalia, CA
Registration date : 2014-09-08
Seriously, no one can help me out on this. Some of you must drive you truck/van at least occasionally, so you can get a quick measurement. Thanks.
OutofSight- Number of posts : 1564
Location : Lake Oroville, Ca.
Registration date : 2015-11-19
I’m unclear exactly what you want measured. You want from the floor to the bottom of the turn signal?
docmcg- Number of posts : 206
Location : Visalia, CA
Registration date : 2014-09-08
That would work. Actually what I need is from where it’s clamped in the dash mount to the bottom of the turn signal. Thanks for the help.
OutofSight- Number of posts : 1564
Location : Lake Oroville, Ca.
Registration date : 2015-11-19
Gotcha!
OutofSight- Number of posts : 1564
Location : Lake Oroville, Ca.
Registration date : 2015-11-19
Here we go...
docmcg- Number of posts : 206
Location : Visalia, CA
Registration date : 2014-09-08
Perfect! Exactly what I needed, thanks for your help. Definitely appreciated!
OutofSight- Number of posts : 1564
Location : Lake Oroville, Ca.
Registration date : 2015-11-19
You’re welcome, good luck with the modification.
dix- Moderator 1st Class
- Number of posts : 8770
Location : pittsburgh pa
Age : 67
Registration date : 2008-05-29
i would have to say i didn't understand his question either i.
i thought he wanted measurements under the truck.
i thought he wanted measurements under the truck.
_________________
still vannin since 1974
