Motor shots

Gotta love the "Supa Dupa Radiator"!!!

Got a line on a 327 w/ a powerglide. Going to check it out tomorrow....

this is my 318 as of now, and int. pic's cant wait to fin duster, so i can start on it. [img][/img] [img][/img] [img][/img] [img][/img]

I had to toss mine into the ring, it isnt done yet but I'm gaining on it.

Here is My Fine looking engine. i haven't done anything to it yet, as you can see I haven't even cleaned it. It seems to be running ok but I haven't driven it too much. Still working on body work. I know you are all probably jealous!!!

Here is my motor looking up at me:





And me looking down onto the motor:


At the side is the Lincoln mega fan I want to install at the front of the radiator.
Kakster

Not in a van, but here's the bad boy 500hp 463 cube roller cammed Pontiac Stroker we just built for my buddy's '67 firebird



Me droppin it in between the fenders



It ran like a bat outta hell... but the bummer is after about a day of driving it developed a pretty good oil leak at the rear of the pan, so now it has to come back out again! Work is never done...

lookin good guys

econo power

love the oil pan...........HOPEFULLY it don't make your oil too hot.........

Kakster wrote:Here is my motor looking up at me:





And me looking down onto the motor:


At the side is the Lincoln mega fan I want to install at the front of the radiator.
Kakster

I think those Lincoln fans are puller fans and not push fans The one I have is out of a Lincoln Mark8 2 speed fan and I don't believe it's reversible...I could be wrong though???

Honestly I don't know if it pulls or pushes, all I do know is it has heavy gage wires, 3 so I figure a low and high speed, and it seems to pull a lot of amps. I appreciate the info though and will use it as I figure how to get it to work. As I recall it came out of the Lincoln from the motor side of the radiator. That day at the yard I got the fan in the picture and a smaller one from a different car, so between the two I hope to get one to work at the front of the radiator in my van. If there is a diode in the circuit then it might not run in reverse, but I wonder if I bypass such a diode could it hurt the fan?
Kakster

Hey Mo_1040, one more thing, do you have a picture of how you set your fan up?
KAK

It's a puller fan...one of the highest cfm fans out there. I am planning on putting mine in this weekend, hopefully?! When I get it in I'll send you some pics... here's a websight that talks about putting in one of these...
http://www.creeperjeepers.org/Electric%20fan%20install%20in%20a%202.5L%20TJ.html

Sorry guys...don't want to steal this thread...I'll get some pics of my motor on here and get it back on track

been waiting all winter to findly get this one into the shop...[url][/url]

only to find out when i get there it's all ready been worked and been cut 30 over and it needs to be cut again so much for this one oh and i sold a vergin 230 block about 3 weeks ago .. I picked this one up a couple of weeks ago claims it's good i started it on the grown and it seemed to be ok heard some noises i didn't really like but i'm going to take a chance and put it in ???

[img][/img]

Dusty! Dusty! Dusty! But here it is anyways...Still have a few things to hook up yet.

The thermostat housing I got from Jegs. It was a little over $100. I got the valve covers off of Ebay for about $60... I got lucky on that auction.

the anemic yet strangely soothing 144....