by zach_1950 Tue Dec 30, 2014 5:10 pmDoes anybody know where I can get a book or instruction manual on how to rebuild a 144?
3 posters
Help Rebuilding A 144
zach_1950- Number of posts : 30
Location : Georgia
Registration date : 2013-12-16
zach_1950- Number of posts : 30
Location : Georgia
Registration date : 2013-12-16
Or if somebody would just sell me a 200 seven bearing for a decent price that would be great 
econopoor- Econoline Guru
- Number of posts : 1747
Location : Jackson TN
Registration date : 2010-04-18
I have a couple of 200 short blocks here that need a complete overhaul. I'd sell them for $100 each. One is a 66 Falcon and the other is a 65 Mustang. The Mustang engine only has the small bolt pattern. The 66 has both. You only need the small pattern in an Econoline. I have some heads too but they will need everything.
Duane in Tennessee
Duane in Tennessee
zach_1950- Number of posts : 30
Location : Georgia
Registration date : 2013-12-16
I Sent you a PM
econopoor- Econoline Guru
- Number of posts : 1747
Location : Jackson TN
Registration date : 2010-04-18
Back at you.
zach_1950- Number of posts : 30
Location : Georgia
Registration date : 2013-12-16
I still haven't been able to track down any literature on the specifics of building a ford l6. Anybody have any helpful hints on where I can find one?
Barnabas- Vintage-Vans Listings Manager
- Number of posts : 2016
Location : Raleigh, NC
Age : 64
Registration date : 2011-01-16
