by Vantasia Tue Feb 25, 2014 9:00 amOn my '64 there is an approximate 2" wide dimple formed into the upper rear passenger side body channel where the wires run to the rear lights. Sorry I don't have a picture, but its a stamped deformation on the edge of the channel about 1/2" into the interior side, any idea what it was for? The only thing I can think of it was an 'access port' to slip the wires into the channel for the dome light and other wire connectors during assembly at the factory or was there some accessory that hung there? Take a look at your vans and see what I'm talking about....here's pic I found, not my van but the arrow shows the notch...
Last edited by jbass62 on Tue Feb 25, 2014 12:18 pm; edited 1 time in total
