VintAGE-Vans

Would you like to react to this message? Create an account in a few clicks or log in to continue.

BRINGING IT ALL TOGETHER.... A's, G's & E's


3 posters

    New guy here, looking for engine mounts

    Magic Bus
    Magic Bus


    Number of posts : 1422
    Location : -Gateway to the West - St Louis Missouri
    Registration date : 2009-12-02

    New guy here, looking for engine mounts Empty New guy here, looking for engine mounts

    Post by Magic Bus Wed Dec 02, 2009 11:01 am

    Hi, just getting around to restoring my recently acquired 1967 e 100 cargo van, 170ci engine 3 speed on the tree. I need engine mounts and can't find them. Any body got a source? Thanks!
    G-Man
    G-Man
    Mayor
    Mayor


    Number of posts : 30743
    Location : Fowlerville, MI
    Age : 63
    Registration date : 2008-05-06

    New guy here, looking for engine mounts Empty Re: New guy here, looking for engine mounts

    Post by G-Man Wed Dec 02, 2009 11:44 am

    Welcome to the site!!!! The econo guy should see this soon to help
    61econoline
    61econoline


    Number of posts : 655
    Location : florida
    Registration date : 2009-04-16

    New guy here, looking for engine mounts Empty Re: New guy here, looking for engine mounts

    Post by 61econoline Wed Dec 02, 2009 2:02 pm

    NAPA part number BK6021235 right BK6021239 left side these are for a 67 falcon van but they might work Try green sales 1-800-543-4959 Part number C5UZ6038A
    Magic Bus
    Magic Bus


    Number of posts : 1422
    Location : -Gateway to the West - St Louis Missouri
    Registration date : 2009-12-02

    New guy here, looking for engine mounts Empty Re: New guy here, looking for engine mounts

    Post by Magic Bus Thu Dec 03, 2009 5:30 am

    Thanks for the #'s Im going to research those today. I had more questions.

    1. What is the designation of "falcon" for some of the vans mean? How do they differ from a standard econoline?

    2. If anybody has a service manual for a 67. I was trying to come up with some tech specs.

    - Timing on a 170 ci
    -dwell reading
    -transmission gear oil type/wieght

    3. Did all of the 67 have backup lights? MIne doesnt currently.

    4. Does this thing have a fusebox? I can't seem to find it. Blower motor doesnt work and there is no power to the switch.

    Id like to buy a service manual but don't know where to get one.

    Thanks
    61econoline
    61econoline


    Number of posts : 655
    Location : florida
    Registration date : 2009-04-16

    New guy here, looking for engine mounts Empty Re: New guy here, looking for engine mounts

    Post by 61econoline Thu Dec 03, 2009 6:58 am

    I only have books up to 63. timing4 deg btdc,dwell at idle 35-38 degrees,point gap .024-.026 trans oil sae 50 engine oil or straight mineral oil gear lubricant wit no additives sae 90. fuse box is attatched to headlight switch on my 61.service manuals come up on ebay from time to time and i think macs antique auto parts sells them.Falcon designation was just "trim " stuff I believe no real mechanical differences .I am just an enthusiast tho not an expert.

    Sponsored content


    New guy here, looking for engine mounts Empty Re: New guy here, looking for engine mounts

    Post by Sponsored content


      Current date/time is Fri Nov 08, 2024 12:34 am