VintAGE-Vans

Would you like to react to this message? Create an account in a few clicks or log in to continue.

BRINGING IT ALL TOGETHER.... A's, G's & E's


3 posters

    Make your own Metal Fan Shroud

    Scott
    Scott


    Number of posts : 1651
    Location : Anoka, MN
    Age : 54
    Registration date : 2008-05-20

    Make your own Metal Fan Shroud Empty Make your own Metal Fan Shroud

    Post by Scott Mon Jun 22, 2009 10:04 am

    For those of us that didn't get the Fan Shroud with their Van, I found this in the July 2009 issue of 'Street Rodder'.

    This magazine is pretty cool, even though they are working on older cars much of it applies to what were doing to our vans. I've found some good info on electrical and brakes in the Street Rodder magazine.


    Make your own Metal Fan Shroud Picture101

    Make your own Metal Fan Shroud Picture102

    Make your own Metal Fan Shroud Picture103

    Make your own Metal Fan Shroud Picture104
    avatar
    ChevyVanMan1


    Number of posts : 425
    Location : Your Nation's Capital
    Registration date : 2009-07-19

    Make your own Metal Fan Shroud Empty Fan schroud

    Post by ChevyVanMan1 Sat Oct 24, 2009 3:03 pm

    it looks cool yet I think it might lessen total air movement thru the radiator. Would think it would need and inch or more of setback from the radiator to suck air thru all of it.
    Casimier
    Casimier


    Number of posts : 864
    Location : Jackson,NJ
    Registration date : 2010-07-26

    Make your own Metal Fan Shroud Empty Re: Make your own Metal Fan Shroud

    Post by Casimier Tue Dec 07, 2010 11:12 am

    Hey ChevyVanMan
    You were right
    Looks like they had restricting air flow at highway speed...
    They had to cut holes in the shroud below trhe fan..
    Read all about it in "UN-SHROUDING A SHROUD" above
    Jim

    Sponsored content


    Make your own Metal Fan Shroud Empty Re: Make your own Metal Fan Shroud

    Post by Sponsored content


      Current date/time is Fri Apr 26, 2024 6:46 pm