Rear brake wheel cylinders ?

I was just checking price and advalibty  for rear brake wheel cylinders. So there are very few places to get them. And whats with the price ? $26-44 ea ?
I'm sure that there is another wheel cylinder that will fit and work correctly. Most wheel cylinders are about $10 or less. And most mopar cylinders will interchange in the backing plates (MOST).
So whats so special about these ?  Has anyone found rear cylinders that will interchange, at a cheaper price ?

i was thinking they were the same as the fronts ?? don't remember now. napa was reasonable when i did mine

Napa only sells repair kits, Mine have bad pits.

i would say the fronts have rubber hoses to the sides while the rears are metal lines in the center,,,,,,and,,,,,,,it aint looking like an easy find,,,,,


http://www.autozone.com/brakes-and-traction-control/wheel-cylinder-rear/dodge/a100-1-2-ton-van/1965/6-cylinders-2-8l-1bl

RockAuto

https://www.rockauto.com/catalog/moreinfo.php?pk=1615316&cc=1329263&jnid=478&jpid=9

I replaced them on the rear of an A100 PU i had for bit, a few years ago now . I think I ended up getting them that would fit a 66 PU truck, A100 was 13/16" and I believe the D100s were 7/8. I'm sure the guys would know better but it could be an option when looking.

dodge a100/108
rear wheel cylinders 15 /16 "                
bendix 33597                                        
vipar v33597                                                                             
napa tsw 4637235                                
autozone 33597
  bendix  33460

rear wheel clyinders 13/16"
advance auto w37041
raybestos wc37041
auto zone 33460
bendix 33460
hope this helps

donivan65 wrote:i would say the fronts have rubber hoses to the sides while the rears are metal lines in the center,,,,,,and,,,,,,,it aint looking like an easy find,,,,,


http://www.autozone.com/brakes-and-traction-control/wheel-cylinder-rear/dodge/a100-1-2-ton-van/1965/6-cylinders-2-8l-1bl

Autozone no longer sells those.

Digz wrote:
I replaced them on the rear of an A100 PU i had for bit, a few years ago now . I think I ended up getting them that would fit a 66 PU truck, A100 was 13/16" and I believe the D100s were 7/8. I'm sure the guys would know better but it could be an option when looking.

That's what I was looking for. A possible interchange. Everything I've seen said that the rear cylinders on an A100 are 13/16. I'm sure that going to 7/8 would no create a problem. Thanks

dix wrote:dodge a100/108
rear wheel cylinders 15 /16 "                
bendix 33597                                        
vipar v33597                                                                             
napa tsw 4637235                                
autozone 33597
  bendix  33460

rear wheel clyinders 13/16"
advance auto w37041
raybestos wc37041
auto zone 33460
bendix 33460
hope this helps

Thanks Dix.

your welcome

Get 1 and try it for fit Rusty. My memory isn't quite as reliable as I'd like it to be.