by esimmons178 Tue Feb 10, 2015 8:19 pmI live in central Indiana, I'm looking to have the inline 240 and the three speed tranny rebuilt. Is there anyone who specializes in old fords like this, or anyone have recommendations on where to get this done thanks a lot.
5 posters
Engine / tranny rebuild 65 epup
esimmons178- Number of posts : 5
Location : Indianapolis
Registration date : 2015-01-05
cali2chitown- Number of posts : 188
Location : Crown Point Indiana
Registration date : 2014-03-14
Ask around for reputable machine shops in your area and look online. Ask prices for boring/honing the cylinders, polishing your crank, head work and assembly if your not going to do it yourself.
Ask about rebuild kit prices and search the internet also. All I can say is do research and figure out how far you want to go with it then make your decision. You might want to disassemble it yourself cuz I think most charge for that too. Check out this website also.
www.cliffordperformance.net
good luck on your epup
www.cliffordperformance.net
'fish- Number of posts : 222
Location : California
Registration date : 2011-12-27
I got a prices from 2000 to 2450 full rebuild from the bearings to the valve guides and everything between 3 year 36k warranty.
EconoUSAparts- Number of posts : 2198
Location : Ft Thomas,Ky
Registration date : 2008-05-17
KOI stores have a machine shop. They redid my heads so I assume they do whole engines. You may check out Jasper Engines also.
Danimal- Number of posts : 11
Location : Jamestown in
Registration date : 2015-03-15
Woodys automotive machine in thorntown good ford guy
|
|
|