BRINGING IT ALL TOGETHER.... A's, G's & E's


Rocky's 67 Chevy G10

Share
avatar
rocky69rhodes

Number of posts : 359
Location : chula vista ca
Registration date : 2014-09-26

Rocky's 67 Chevy G10

Post by rocky69rhodes on Thu Oct 02, 2014 1:02 am

" /> 9/29/14
avatar
rocky69rhodes

Number of posts : 359
Location : chula vista ca
Registration date : 2014-09-26

The van before any work back doors

Post by rocky69rhodes on Thu Oct 02, 2014 1:29 am

" />
" />
avatar
rocky69rhodes

Number of posts : 359
Location : chula vista ca
Registration date : 2014-09-26

Side Door

Post by rocky69rhodes on Thu Oct 02, 2014 1:32 am

" />
avatar
rocky69rhodes

Number of posts : 359
Location : chula vista ca
Registration date : 2014-09-26

Interior

Post by rocky69rhodes on Thu Oct 02, 2014 1:51 am

" />
" />" />
" />
" />
" />
avatar
rocky69rhodes

Number of posts : 359
Location : chula vista ca
Registration date : 2014-09-26

Druvers Area

Post by rocky69rhodes on Thu Oct 02, 2014 1:59 am

" />
" />
avatar
rocky69rhodes

Number of posts : 359
Location : chula vista ca
Registration date : 2014-09-26

Electrical repairs 1/2 done

Post by rocky69rhodes on Thu Oct 02, 2014 2:10 am

" />


" />
avatar
rocky69rhodes

Number of posts : 359
Location : chula vista ca
Registration date : 2014-09-26

Re: Rocky's 67 Chevy G10

Post by rocky69rhodes on Thu Oct 02, 2014 2:15 am

I finally found a good mechanic on craigslist(SAN DIEGO MOBILE MECHANICS Todd Park 619=779-8148)
avatar
Vantasia

Number of posts : 1321
Location : New Jersey
Age : 63
Registration date : 2013-08-18

Re: Rocky's 67 Chevy G10

Post by Vantasia on Thu Oct 02, 2014 5:57 am

You've got a good starting point and lots of 'fun' things to do! Door inards can be found here and at VCVC ('sister' site like this one, lots of members with parts to spare). That tan wire coming from the floor in the left rear corning is the gas gauge sender. Good luck with it! When starting out with an old vehicle, a good thing to do is make a huge list of everything it needs starting with mechanicals, electrical, exterior, interior, etc. and then check them off one by one as you do things. Also a good way to prioritize parts needed and where to find them and if and when you eventually sell it, its a good way to remember everything you did/bought for it to tell the potential buyers. I have a 5 page list somewhere...LOL
Here's some pics of my buddy's radical 108 for some inspiration....

avatar
rocky69rhodes

Number of posts : 359
Location : chula vista ca
Registration date : 2014-09-26

Re: Rocky's 67 Chevy G10

Post by rocky69rhodes on Thu Oct 02, 2014 11:50 am

gee thanks it will be awhile lol What year is that I notice side lights
avatar
rocky69rhodes

Number of posts : 359
Location : chula vista ca
Registration date : 2014-09-26

muffler clamp done

Post by rocky69rhodes on Sat Oct 04, 2014 11:37 am

" />
Before
" />

After
" />
Before
" />
After
avatar
Vantasia

Number of posts : 1321
Location : New Jersey
Age : 63
Registration date : 2013-08-18

Re: Rocky's 67 Chevy G10

Post by Vantasia on Sat Oct 04, 2014 8:39 pm

I think they went front markers '68 and both '69? My '64 has front doors with markers so they are from a later van. I added rear LED ones used for running lights on trailers...here's a pic with lights on!
avatar
rocky69rhodes

Number of posts : 359
Location : chula vista ca
Registration date : 2014-09-26

Re: Rocky's 67 Chevy G10

Post by rocky69rhodes on Sat Oct 04, 2014 8:53 pm

Very Nice

Sponsored content

Re: Rocky's 67 Chevy G10

Post by Sponsored content


    Current date/time is Tue May 23, 2017 3:28 pm