Pulling the 225 from my A108, already have the trans & bell housing removed, where is the best location to put the lifting chain? V8's are easy, lifting plate bolted to the intake, but this laid over behemoth has me wonder where the center of weight will be.
3 posters
Pulling Slant Six
busman78- Number of posts : 483
Location : Oklahoma City, OK
Registration date : 2012-07-11
- Post n°1
Pulling Slant Six
RodStRace- Number of posts : 3046
Location : Chino Valley
Registration date : 2010-01-21
- Post n°2
Re: Pulling Slant Six
There are 2 threaded holes on the top of the head, pointing straight up by the manifold surface. Attach a chain there. It will lift straight up!
busman78- Number of posts : 483
Location : Oklahoma City, OK
Registration date : 2012-07-11
- Post n°3
Re: Pulling Slant Six
Okay, saw those, they look awful tiny, but I am game
61v100- Number of posts : 29
Location : G.R. Michigan
Registration date : 2013-11-12
- Post n°4
Re: Pulling Slant Six
Those are 3/8 course thread , screw the chain in tight or they will pull the threads out.
|
|