Proud Owner of a 66 A100 p/u

Yes, I had the same kart, Rupp "A" Bone with a Mac 91B.
I have built a 91B for this kart but this Power Product runs so good I hate to switch.

the vin tag photo is fuzzy , your pickup
1st # 1=a100v pickup
2nd # 8= pickup
3rd # 8= v-8
4 th # 2=warren
5 thru 10 #'s are sequence #'s 055000 thru 097999 if you get me a better photo af the large
tag I can help you with that as well.

Here is somthing to look at for the spare tire.   http://www.m5p.com:8000/pickup/

Dix, I apologize for that photo. I will get a better one on the way. Do you have any information on the small tag next to the main large tag? It references a number for when ordering parts and it is in English and Spanish.
Tim
Thanks also for the spare tire info. I would rather install an original one if I can find one.

that should be your vin number that is what i took the #'s from the other will tell gvw. axles rear gears engine and trans, you stated earlier you had for sale 11 in brakes that should be 2,500 on the tag.

also those drums and brakes should fit the rears,

Dix, following is the info on my vin tag:

A120 090
3600 391 CHRY RA36
2500 3 AUTO CHRY A727
140 3900 1100 1410
05200 11025516

Thanks!

If all else fails i do have the spare tire bracket and maybe hardware but i think shipping would not be nice , but the tabs welded were cut off . see what else pops up.

I work at a fabricating shop with 4 lasers, 2 water jets, and 3 CNC machines. Im sure I could fabricate anything that's missing. let me know what you think.

See if anything local pops up

this one is in the same state. http://terrehaute.craigslist.org/pts/4209130064.html

penstar i sent you a pm. go to the top of the page and click measage tab

Dix, I saw that one in Terra Haute. I see the spare tire mount in the bed. The rest is pretty rough. I dont see the message tab for the PM. I will keep looking. Dropped my leaf springs off yesterday to be de arched 1".

beautiful truck, looks like its been very well taken care of,

Thanks Dodge Man. It spent all of its life in California and was rustfree when it was restored back in 2002. There is alot to say about that west coast sheet metal.

I just cot the spare tire mount out of my van yesterday... Want it? I'm going to a back dore mount I got off a 67 bubble top camper. Pics in the Dawgvan thread.

Im sorry but where do I find the dawgvan thread?

Dawgboy, found the thread with the pictures.
If that would work in the back of my truck, I am definatly interested.
Thanks!

Love the truck and the interior is amazing. Think I may go with cloth centers in my seats looks great and warmer in the winter.

thanks for the compliments!!

I am flying to Gary IN. (Chicago Midway) Next friday, for my father in-law's funeral. I could probably fit it in my suitcase if getting to Gary is feasable for you. I have no idea if it would work in the pickup as I have only seen one pid of a pickup with the tire in it. My guess is with a little trimming, it's the same.

Let me know what you think?

Scott

pentastar66 wrote:Dawgboy, found the thread with the pictures.
If that would work in the back of my truck, I am definatly interested.
Thanks!

Yes, the spare tire braces are the same except for the one for the van has another brace attached and goes from the wheel well hump to the rear door jamb. Cut that off and it should work for the pickup with a little massaging.

Sorry to hear about your loss.
I actually found one in Ohio.
Thanks!!!

Tim ,just picked up my March issue of Classic Trucks & see your Sweet Dodge A-100.
Real nice pics ,story, and great to see it in a major(at least to me??)mag

Thanks!! Since those shots were taken I have lowered the front end 1 inch, installed disc brakes. and reinstalled the spare tire mount. I am so ready for spring!!!!!!!