Custom Service's New 65!

We just bought this van today, looking for some helpful information on where to get some parts....as you can see by the photo's that the rear door and lights have been shaved and the side door is in the process of being gullwinged. Gonna try to get it running in the next few days but the engine harness is fryed and we are looking on where to get a replacement harness....any helpful info or coments would be apprecaited..

Custom Service
Norton, MA
bcking73@gmail.com

. . . to the site!

Looks like a very good project. The Chevy guys should chime in soon to help answer your questions.

Welcome to the site!!! Look much like my project 64, your out of luck finding a stock harness. Go with a painless type set up

G-Man wrote:Welcome to the site!!! Look much like my project 64, your out of luck finding a stock harness. Go with a painless type set up

G-Man thanks for the info, I was hoping that somebody might have one laying around.....

I really don't think you want 40+ years old wire in there anyway.

Welcome, nice van. You find it in MA.

Yeah, friend of ours had it, and sold it to us because he found a better van in California he wanted to buy...

savage wrote:Welcome, nice van. You find it in MA.

If you were maybe thinking of making some changes ,like 1 wire alt and HEI ignition and real guages ,alot of those wires become dead wieght anyway past the big connector,also the main dash feed conection in that mess has most likely been over heated and nearly burned out anyway. at least thats what I have run into on a couple vans.

Same here, got a few spare harness ,but they all got bad(burned or melted) spots someplace in them