by jifop Sun Aug 14, 2016 1:00 amDoes anyone have a good quality drawing of the 240 belly pan?
I need to make one up
I need to make one up
4 posters
Belly pan drawing
jifop- Number of posts : 65
Location : Hertfordshire, UK
Registration date : 2016-05-22
DaGroats- Number of posts : 40
Location : Rosamond Ca
Registration date : 2015-06-24
I stumbled on one in here about a year ago. The post was several years old. I've spent the last two hours looking, but no joy 
jdlaugh- Number of posts : 298
Location : Tulsa, OK
Registration date : 2013-03-18
I haven't seen a drawing, but this thread provides some pretty good images of the 240 bellypan: https://vintage-vans.forumotion.com/t13688-belly-pan-information
Click on the pictures in the thread to see the full image.
Click on the pictures in the thread to see the full image.
DennisStuy- Number of posts : 17
Location : The Netherlands
Registration date : 2015-09-01
I have a cad drawing of a bellypan, had it lasercut but not fitted yet. So i'm not sure if it will fits.
No problem to send you the file.
No problem to send you the file.
jifop- Number of posts : 65
Location : Hertfordshire, UK
Registration date : 2016-05-22
That would be bloody great if you could! DXF or DWG if possible!
Thanks
Thanks
DennisStuy- Number of posts : 17
Location : The Netherlands
Registration date : 2015-09-01
PM me your emailadress and i send you the dwg file and picture of my cut-out.
All sizes are metrical and in mm, i'm from the Netherlands
Don't know if it fits, haven't tried it yet.
All sizes are metrical and in mm, i'm from the Netherlands
Don't know if it fits, haven't tried it yet.
|
|
|