by dmorris42 Sat Jan 03, 2015 11:53 amI am installing a 1984 chevy 350 2 bolt in my sons 1966 g10. Having trouble finding lower motor mounts. any help would greatly be apriciated.
3 posters
1966 Chevy v 8 convershion
dmorris42- Number of posts : 2
Location : StJoe Mo
Registration date : 2014-07-08
donivan65- Governor
- Number of posts : 12220
Location : San Diego, California
Registration date : 2008-05-12
Does it look like the 6 cylinder ones will work?
dmorris42- Number of posts : 2
Location : StJoe Mo
Registration date : 2014-07-08
No They they mount through the center and the mounts for the 350 go side to side
kookykrispy- Number of posts : 1533
Location : Helendale, CA
Age : 50
Registration date : 2009-05-22
they are exactly the same
donivan65- Governor
- Number of posts : 12220
Location : San Diego, California
Registration date : 2008-05-12
well,,,,,,the mounts go between the bracket on the engine and crossmember,,,,,
donivan65- Governor
- Number of posts : 12220
Location : San Diego, California
Registration date : 2008-05-12
kookykrispy- Number of posts : 1533
Location : Helendale, CA
Age : 50
Registration date : 2009-05-22
And those same rubber motor mounts bolt directly to the v8 block. No bracket needed.
donivan65- Governor
- Number of posts : 12220
Location : San Diego, California
Registration date : 2008-05-12
,,,,,unless you have some other set up,,,,,this is a 1978 Chevy Van 350 set up,,,,,,,
|
|
|