American mags for my Eco

I want to put 15" American Torque Thrust Wheels on my Eco P/U.  It currently has 14 in rims, everything looks like it will clear ecept the very front radius. I think I have 1/2  3/4 of an inch as it sits.
Anyone have good results with the 15 inch and what width and offset do you get.

Thanks
Richard

I'm running 15x6 with 0 offset.
Tires are 195x65 front and 205/65 rear. Many miles with no problems.

This topic is pretty well covered on here, do a search for it you should find a lot of information.

Carl,
Thank you. Do you think the 205/65 would work on the front. I like to keep everything the same.
I tried doing a search but you get way too much information to waddle through.

I would think they'd fit although I've never tried. I wanted that look.

I took my 15's off. Every time I hit a bump I had to tight my cheeks to the seat. I was afraid I was going to fold my wheel under the truck..

Ddavllc wrote:I took my 15's off. Every time I hit a bump I had to tight my cheeks to the seat. I was afraid I was going to fold my wheel under the truck..

There seems to be some discrepency here about the 15" wheels, maybe you had a big neg offset? Lots of guys run them with no problem?

Front 15x7 American with 225x60x15. With stock springs, Shelby 4 piston disc brakes. 1/8" spacers to clear lug stud. No problem, since 1979.  
https://i.servimg.com/u/f57/18/28/25/46/econoc45.jpg

Rear 15x7 American with 225x60x15. 245x60x15 no problem at stock height. With stock springs, brakes,9" 355 posi. No problem, since 1979.   https://i.servimg.com/u/f57/18/28/25/46/econoc44.jpg