3 point seatbelts

Bought a set of these seatbelts and got them installed today. I think they are pretty awsome seatbelts, comes with all the shoulder bolts and plenty extra. Easy to install, used the long brackets to stiffen up the door post, bought a second set just to sit on the shelf in case I ever needed them for another project.

http://www.ebay.com/itm/221098013559?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649


Mo_1040

They look like a good deal to me as well, just bought a set for my 66, and a set for my 67! Thanks for the information!


Tom

Let's see a picture of how you installed these. Thinking about putting in some safer belts in my 65.

I can not tell a lie..... I just bought a set for my 66 panel!!!

Yes, it is a very good deal and anyone contemplating putting in 3-ways (As we all should!). I would seriously consider these...

The straps on these are long enough that you can bolt the retracters to the floor if you wanted to. I've tried seat belts from other trucks and didn't work out to well. This set has tons of hardware and installed easily. I'll get some pics of mine next time I'm out at the garage.

http://www.ebay.com/itm/SEATBELT-RETROFIT-KIT-THREE-POINT-SAFETY-BELT-HUMVEE-HMMWV-2-REAR-BELTS-SAE-NEW-/180973472763?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a22dc0bfb#shId

Another set....cheap!!!

http://www.ebay.com/itm/SEATBELT-RETROFIT-KIT-THREE-POINT-SAFETY-BELT-HUMVEE-HMMWV-2-REAR-BELTS-SAE-J366-/180975633180?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a22fd031c

http://www.ebay.com/itm/Rear-Seatbelt-Kit-HUMVEE-HMMWV-M998-Three-Point-Seatbelt-Retrofit-Non-Armor-/180957210478?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a21e3e76e

My two sets of seat belts arrived today. Looking forward to some pics of the install for some ideas on how I want to do mine.

Tom

Got notification that mine were shipped today, so I should have them within a week...

Looks like mine shipped as well, having said that what are you guys using for high back seats? Anyone tried Jeep seats? I have an A 100.

When I had my Best Top jeep seats out of the jeep I sat them in the Panel and the fit width wise very well. But thought they might be about an inch high after mounting hardware...

Here's one of the brackets that came with the kit to stiffen up the door post...pop rivets on....

I also used the other bracket that came with 'em...had to cut a access hole on driver side. I decided to mount the retracters on the side of the bracket because I plan on paneling that area...

Got mine today, nice new seatbelts are much better than old ones from the junkyard, and even with shipping these were cheaper!

do you have to have the retrofit kit also? or is that the same thing just different part #s and were do you mount the female end is it long enough to reach up beside your lap by the dog box?

Got mine too! Of course mine are for the 66 panel so they will stay in the box until she's ready! But good to see pic's on how you installed them!!!

Dan

Just received mine today:-) great install pics, but what did u do for the other end? Female side seems a little short. Thanks

On the female end, it's bolted to a piece af flat stock inside the doghouse that my seats bolt to.

JUST RECEIVED MINE TODAY, CANT WAIT TILL THE NEXT TIME BARNEY PULLS ME OVER I'LL SHOW'M OFF HE WANTED TO GIVE ME A TICKET FOR HAVING JUST A LAP BELT AND I TOLD HIM THATS ALL THAT CAME IN THESE IN 68

Bought my set this morning. I have a lot of interior work to do before installing them. I hope they dont interfere with the plastic pieces for the original interior.

Yeah, I'd like to see some install ideas on a sportvan with plastic paneling and the small triangle window. It'd be cool to channel a slot or something in the paneling so some of the belt is nicely tucked away behind it.

ScottyJones wrote:Yeah, I'd like to see some install ideas on a sportvan with plastic paneling and the small triangle window. It'd be cool to channel a slot or something in the paneling so some of the belt is nicely tucked away behind it.

When I get mine I will make sure to take plenty of pictures for us Sporty guys that would like to install them.

**EDIT** I should also add that I have Fiero seats in the 66 and will be mounting the female end to the bracing that I installed for those seats. I made it out of 1.25" 11 gauge tubing which will hold up a lot better in an actual crash than the thin wall of the dog house.

I HAVENT STARTED ON MINE YET BUT I HAVE A PLAN USEING A 1'' HOLE SAW TO CUT THROUGH THE PLASTIC ON THE PILLERS BESIDE THE SEATS TO HOLD UP THE BELT AND BOLT THE END AND RETRACTOR TO THE BOTTOM TO THE LOWER WALL, ON THE FEMAIL I'LL CUT SOME 1'' WIDE FLAT STEEL ABOUT 15'' LONG AND MOUNT IT BETWEEN THE SEAT AND DOG BOX TO THE FLOOR,THAT SHOULD STOP ANYONE FROM SCRAPPING MY FACE OFF THE WINDSHIELD,

just hit buy now for mine !

yeah you cant beat the price for them, i got mine under 10.00

Just paid for mine... Can't wait!!

I bought a set from jegs when i first bought my van and i didn't like them. I think they were $89 each.

Shipping looks a little high $14.00 for a $9.98 item.
Is he a rip-off, or is the box heavy? $25 still cheap, are they worth it?